Japa Firewood Processors - Japa 395 Firewood Processor

Japa 395 Firewood Processor
  • Optional:
  • 4-way traditional knife (+$799.00)
  • 8-way traditional knife (+$1,149.00)
  • 12-way traditional knife *for softwood only* (+$1,399.00)
  • Hydraulic slew adjustment for outfeed conveyor (+$1,699.00)
  • Grizzly bar set for 4.2M / 13.8′ conveyor (+$1,099.00)
  • Hose adapter 435720 for sawdust extractor (+$119.00)
  • Hydraulic powered sawdust extractor kit (+$2,399.00)
  • Built-to-order configuration options:
  • With working terrace / platform and machine risers (+$2,299.00)
  • With Perfect Clean – includes shaker, rear conveyor, working platform, and risers (+$7,499.00)
  • Features:
  • Electric over hydraulic joystick controlled with EASY one hand operation of infeed / cut / split functions
  • Hydraulic powered infeed belt with forward and reverse
  • Adjustable hydraulic log stop – stops infeed belt when desired cut length is reached
  • Fully guarded saw / split chamber – saw and splitter operation halts if guard is open
  • Hydraulic joystick controlled adjustable 6 way knife included as standard
  • Speed control for outfeed conveyor included standard
  • Adjustable chainsaw come-down pressure
  • Overhead idle roller clamp for infeed
  • Programmable shelf for controlled drop of wood into split chamber
  • 3 point hitch connections* and pallet fork pockets for mobility
  • *3 point not accessible on Honda powered model*
  • 1 year warranty on machine
  • 3 year warranty on Honda iGX engine option
  • Tech Specs:
  • PTO powered version
  • 540 RPM PTO shaft included – to be ran at 400 RPM
  • 35+ PTO horsepower required to efficiently saw and split simultaneously
  • Electric powered version
  • 480V 3 phase electric required
  • 10kW motor – 30A plus circuit required
  • Honda iGX700 powered version
  • 22 horsepower v-twin with EFI and electronic governor
  • Front panel controls of engine including display readout
  • TWO 6 gallon marine fuel tank with quick connects included
  • Max input diameter 16 inch
  • Max input lengths of 8 feet OR up to 16 feet with an optional log rack
  • Max cut length of 20.5 inch long
  • Joystick control of infeed / cut / split functions
  • Forward AND reverse of infeed belt
  • Adjustable split size
  • 6 way hydraulically adjustable knife included
  • Optional 4-way available
  • Optional 8-way available
  • Optional 12-way available *For use with soft wood only*
  • 4.2M/13.8′ hydraulic outfeed conveyor included
  • Mechanical pivot with 5 positions
  • Speed control regulator included with 395
  • Adjustable automatic bar oil pump with separate reservoir
Models - Japa 395 Firewood Processor
395TR - Powered by tractor PTO
$47,999.00   Contact us for current production lead times. Add to Cart Add to Cart: 395TR - Powered by tractor PTO
395 TRE - Powered by tractor PTO or 480V 3 phase
$50,999.00   Contact us for current production lead times. Add to Cart Add to Cart: 395 TRE - Powered by tractor PTO or 480V 3 phase
395 BE - Powered by Honda iGX700 engine package
$54,999.00   Contact us for current production lead times. Add to Cart Add to Cart: 395 BE - Powered by Honda iGX700 engine package

Since 1977, Japa has been manufacturing efficient and powerful firewood processors in Finland. In mid-2025, Japa signed the contract with us to setup Wolfe Ridge as the sole USA importer and distributor of Japa Firewood Processors and accessories. The Japa 395 can process up to 16 inch diameter, and split up to 20.5 inch lengths. The 395 is easy to use with electric over hydraulic joystick control of infeed / cut / split functions, hydraulic knife height adjustment, and more. This machine is offered in three power source configurations: PTO powered (any tractor with a 540 RPM PTO shaft and more than 35 horsepower), 480 volt 3 phase electric, or the Honda iGX700 v-twin gas engine package. 

The Japa 395 is extremely easy to operate with one hand joystick control of infeed / sawing / splitting functions. Push the joystick up and to the left to infeed the log, pull the bottom electric trigger and down on the joystick to cut, pull the top trigger on the joystick to engage the split cycle – which then cycles forward and back automatically. Optional hydraulic log racks are available for this machine – we recommend the 471 2 chain rack for best optimal performance. A 4.2M / 13.8′ powered outfeed conveyor is standard with this machine. 

The 395 is a great choice for the professional firewood producer that wants a powerful stationary machine that can process up to 16 inch diameter timber quickly – process 2-3 full cords per hour with the right logs! For great results in your wood yard every time, choose a Made-in-Finland Japa, offered in the USA by Wolfe Ridge!! *For Perfect Split functionality in this same frame, see the Japa 405* 

Ask about shipping and delivery options when you place your order.  

Payment Terms

Place your order by email or by phone.

Only 20% down payment (due to longer lead times). Balance due just prior to shipping (we will call or email when machine is close to completed).  

5% discount for verified US Military service, Police, Fire, and EMT (owner only, must email copy of ID, DD214, or VA card). Payment by check or bank transfer preferred.  

Payment by check or bank transfer preferred. There will be a 3% fee added for all credit or debit card payments.  

Video - Japa 395 Firewood Processor

Japa 395 Firewood Processor for professionals.


JAPA 395 - realizacja u klienta


Hardwood cut and split with Japa 395 in Japan!


Japa 395 firewood processor with easy last piece control. So sideways hassle